EN 
ES 
FR 
1. Cutting the Tannus Armour
Before installing Tannus Armour, check if the size of your tires is listed in one of the sizes shown in the table.
Once verified, cut the side of the Armour with scissors to the size indicated by the cut line.
2. Clean the Armour
Clean the inside and outside of the Armour with a soft cloth before installation.
Dust and other foreign objects can affect the lifespan of the Armour.
3. Inflate the inner tube
Inflate the inner tube slightly. It helps with its placement inside the Armour.
4. INSTALL ONE SIDE OF THE TIRE AND ARMOUR
First, bead one side of the tire around the rim and then place the Armour inside the tire and rim.
5. INSERT THE INNER TUBE INTO THE ARMOUR
Start by placing the valve of the inner tube in the rim hole, and then insert the rest of the inner tube inside the Armour (making sure the wings of the Tannus Armour are not folded).
6. Bead the tire on the rim
After placing the remaining wing of the Armour on the rim and ensuring that the inner tube is not pinched between the Armour and the rim, bead the other side of the tire on the rim, using a tire lever for mounting (taking care not to damage the side wings of the Armour).
7. Inspection & Inflation
Check that the tire is properly installed. Inflate to high pressure to ensure everything is well seated. Then, choose your preferred inflation pressure.
If you need more information, don't hesitate to contact us through the contact page or download the brochure using the following button.
Installation manual