Many of you have asked us for some tips on how to install Tannus Armour. In this post, we are going to tell you in detail how to install our best seller; the Tannus Armour 2 in 1 Puncture & Puncture Protector .
Mounting Tannus Armour for inner tubes
Have you bought a Tannus Armour and found it difficult to install it on your wheel? Don't worry, keep reading this blog and you will learn how to mount Tannus Armour in just a few minutes.
The first thing to keep in mind is to ALWAYS check if you should cut the Armour along the cut lines. If the size of your tire is in this table, you must cut the Armour before installing it.
![Mount Tannus Armour cut](https://tannustires.com/wp-content/uploads/2023/07/Tannus-Armour-tallas-que-se-han-de-cortar-510x749-1.jpg)
3 TIPS TO KEEP IN MIND BEFORE MOUNTING TANNUS ARMOUR
- Clean the part inside y outside with a soft cloth to extend the shelf life of the product
- Putting the Armour around the rim about 15-20 minutes prior to installation will help it take shape and make mounting Tannus Armour a matter of minutes.
- Add talcum powder between (1) the inner tube and the Armour and (2) between the Armour and the tire. This action will make mounting the Tannus much easier and will help to better couple the Armour with the different elements of your wheel.
ASSEMBLY, STEP BY STEP EXPLAINED
3 TIPS TO KEEP IN MIND AFTER ASSEMBLY
- Once assembled, inflates the wheel to high pressure so that the whole thing is well heeled. After a couple of minutes, you can lower the pressure to the pressure you want. Remember that the Armour allows you to ride at a lower pressure than usual for exceptional grip.
- If you are not going to use the bike for a few days, deflates the wheels a little to restore the Armour to its original volume. This will help you to extend the life of the product and increase its performance on your next outings.
- Remember that the Armour allows you to ride lower pressure than usual for exceptional grip. Rolling at a higher pressure than the indicated pressure increases the chances that the Armour will be compressed and therefore less effective.
So far the tips for mounting the Tannus Armour for inner tubes. If you have any other questions about the assembly, you can contact us through our Instagram account @Tannus_armour or by e-mail to info@tannustires.com
If you have bought a Tannus Tubeless, pay attention to the blog because in the next few days we will publish the post with tips for mounting Tannus Tubeless.